Glassfit CC-800

GlassFit CC-800

The New system of high-performance clamps for public and private use

CC-800

The new GlassFit CC-800 glass railing floor clamp system is the ideal solution for designers who require robust railings with a clean and stylish design.

Designed to make assembly and installation tasks as easy as possible, this innovative system allows the anchors to be spaced from 600 to 850 mm, reducing installation times and facilitating quick and economical execution.

This railing system resists corrosion from humid and saline environments and is ideal for both public and private projects.

Contemporary design: The new GlassFit CC-800 clamp has a clean design with soft corners that gives the aesthetics of the property a modern and elegant image. The increased distance between anchor points allows the user to enjoy full visibility of the landscape.

Safety: Its resistance, rigidity and solidity values ​​are the highest of all clamp railing systems, and it has been designed in accordance with international safety standards.

Ease of instalation: The technology built into the system facilitates a quick and flawless installation without the need to drill into the glass. The SLOT 180 and LEVEL 3D devices allow the glass panels to be correctly levelled and aligned. This leads to increased efficiency regarding fitting and therefore the costs of the project are reduced.

Banner_Glassfit_CC-800_BLACKFINISH
logo_black_finish

CC-800 new PVD finish in black

BLACK FINISH is a PVD finish that is applied to the stainless-steel product using a vapor deposition technique, which provides great resistance to factors such as exposure to UV rays, corrosion, detergents and solvents, or pollution.

Banner_Glassfit_CC-800_BLACKFINISH
logo_black_finish

CC-800 new PVD finish in black

BLACK FINISH is a PVD finish that is applied to the stainless-steel product using a vapor deposition technique, which provides great resistance to factors such as exposure to UV rays, corrosion, detergents and solvents, or pollution.

CC-800_Black_Finish
CC-800_barandilla_piscina
logo_duplex_imagen_piscina-1

The most advanced solution
against corrosion

The GlassFit CC-800 clamp for glass railings is available in DUPLEX 2205 stainless steel. The greater resistance to corrosion of this steel makes it recommended for installation in areas such as swimming pools, where there may be direct exposure to chlorine. It has been tested to resist the swimming pool load of 0.5 kN/m, with a safety coefficient of 1.5 and a height of 1,200 mm, with 10+10 laminated glass of 1,800 mm length.

CC-800_barandilla_piscina
logo_duplex_imagen_piscina-1

The most advanced solution against corrosion

The GlassFit CC-800 clamp for glass railings is available in DUPLEX 2205 stainless steel. The greater resistance to corrosion of this steel makes it recommended for installation in areas such as swimming pools, where there may be direct exposure to chlorine. It has been tested to resist the swimming pool load of 0.5 kN/m, with a safety coefficient of 1.5 and a height of 1,200 mm, with 10+10 laminated glass of 1,800 mm length.

sistema_duplex-125x294
 


State-of-the-art technology for a professional installation.

As a result of the work of our R + D + I department, and of our experience collaborating with architects, builders and designers, we present the new GlassFit CC-800 high-performance clamp railing system.

3-POINT LEVELLING SYSTEM “LEVEL 3D”: The LEVEL 3D levelling system allows to regulate the XYZ axes to guarantee the verticality of the railing on floors up to ± 6.1% (3.5 °) of slope. Likewise, it corrects and absorbs irregularities of up to 5 mm in the slab.

“SLOT 180” MECHANISM TO CORRECT DRILL DEVIATIONS: The “SLOT 180” mechanism located at the base of the clamp facilitates installation even if the centre of the hole of each anchor has deviated up to a maximum of ± 3.5 mm = 7 mm from its initial mounting position.

PERFECT GLASS FIT:This system allows adjustment and levelling tasks to be carried out with the glass resting on the clamp. In the same way, the lateral movement on the supports is facilitated until it is placed in its final position. The result is a firm railing, perfectly aligned and with the glass always centred in the hole of the clamp. Once the clamp is fixed to the ground and the glass is in its final position, a short allen key will be used for levelling, and a ratchet or combination spanner will be used to fix the anchor.

GlassFit CC-800

Designed to facilitate assembly and commissioning tasks

Technical characteristics

CC-800
CC-800
CC-800
Polished finish Satin finish
caja A B C D RE
1 250 100 90 24 50-55
Slot 180 Level 3D
Screw Short allen Key Pin wrench Drill hammer Torque wrench

Download technical documentation >

Accessories required for installation


PL-80

PL-80

caja A/Uds B/Uds G
1 1 1 (17,52)
1 1 1 (20,38-20-76)
1 1 1 (21,52)

Set for fixing glass for base glass clamp for glass railing system GlassFit CC-800

BR-2031

BR-2031

caja ? RE
1 2 7-40

Pin wrench for base glass clamp CC-780/782/800

Compatible handrails

RP-1400

RP-1400

RP-1410

RP-1410

RP-1411

RP-1411

SV-1260

SV-1260

ST-314

ST-314

ST-315

ST-315

Without Handrail

Without Handrail

We are in contact