GlassFit CC-800 system in stainless steel DUPLEX 2205
Complies with the load of 0.5 kN/m pools and 1200mm height of the CTE with laminated glass 10+10 of 1800mm in length.
The greater corrosion resistance of this steel makes it recommended for installation in areas where there may be direct exposure to chlorine.
The PL-80 glazing kit ensures that this glass railing clamp system has greater resistance, offering a surprising sense of solidity and unprecedented rigidity, meeting the standards and technical specifications of the most stringent international regulations.
For use in pool areas, it is installed with 10+10 laminated glass with panels up to 1800 mm in length and 1200 mm in height.
The price of the system is lower than other similar ones, as it allows for greater modulation, the number of clamps required per metre of railing is lower, as well as the number of anchors to be made and the time required for installation.
Device “SLOT 180” for correcting drill deviations:
The “SLOT 180” device located at the base of the clamp facilitates installation, even if the centre of the drill hole for each anchor has deviated by a maximum of ±3.5 mm.
3-axis levelling system:
The LEVEL 3D levelling system allows regulation of the XYZ axes to guarantee the perfect adjustment of the glass.
The GlassFit CC-800 DUPLEX 2205 railing system meets the railing requirements in swimming pool areas in Spain (CTE DB SUA 6 Safety against the risk of drowning), for the minimum required height of 1200mm, horizontal load of 0.5 kN/m, and partial safety factor of 1.5, according to the safety requirements of the CTE. Additionally, it exceeds the impact resistance tests of the UNE 85238:1991 standard Railings. Test methods.
The most advanced solution against corrosion
The GlassFit CC-800 clamp system for glass railings is the solution for professionals who require robust, secure railings with a sleek design.
